ZyXEL Communications EX3301-TO - Page 16

16
QoS
General
Use this screen to enable or disable QoS and set
the upstream bandwidth or assign trac priority.
Queue Setup
Use this screen to configure QoS queue assignment
to decide the priority on WAN/LAN interfaces.
Classification Setup Use this screen to add, edit, or delete QoS classifiers.
Shaper Setup
Use this screen to limit outgoing trac rate on the
selected interface.
Policer Setup
Use this screen to view QoS policers that allow you
to limit the transmission rate of incoming trac and
apply actions, such as drop, pass, or modify, to the
DSCP value of matched trac.
NAT
Port Forwarding
Use this screen to forward incoming service requests
from the Internet to the server(s) on your local
network. Port forwarding is commonly used when
you want to host online gaming, P2P file sharing, or
other servers on your network.
Port Triggering
Use this screen to configure port triggering on the
Zyxel device.
DMZ
Use this screen to specify the IP address of a default
server to receive packets from ports not specified on
the Port Triggering screen.
ALG Use this screen to enable or disable ALG settings.
Address Mapping
Use this screen to configure address mapping on
the Zyxel device.
Sessions
Use this screen to limit the number of concurrent
NAT sessions a client can use to ensure that no single
client uses up too many available NAT sessions.
DNS
DNS Entry
Use this screen to view and configure DNS routes on
the Zyxel device.
Dynamic DNS
Use this screen to configure a DDNS service provider
on the Zyxel device.
Vlan Group
Use this screen to group and tag VLAN IDs to
outgoing trac from the specified interface.
Interface Grouping
Use this screen to create multiple networks on the
Zyxel device.
USB Service
File Sharing
Use this screen to set up file sharing through the
Zyxel device.
Media Server
Use this screen to use the Zyxel device as a media
server.