15
Link Tab
Function
Home
Networking
LAN Setup
Use this screen to set the Local Area Network IP
address and subnet mask of the Zyxel Device.
Static DHCP
User this screen to assign IP addresses on the LAN to
individual computers based on their MAC Addresses.
UPnP
Use this screen to enable or disable UPnP State or
UPnP NAT-T State.
Additional Subnet
Use this screen to configure IP alias and public
static IP.
STB Vendor ID
Use this screen to configure the Vendor IDs of
connected Set Top Boxes (STBs) so the Zyxel device
can automatically create static DHCP entries for
them when they request IP addresses.
Wake on LAN
Use this screen to remotely turn on a device on the
network, such as a computer, storage device, or
media server.
TFTP Server Name
Use this screen to identify a TFTP server for
configuration file download using DHCP option 66.
Routing
Static Route
Use this screen to view and configure the static
route rules on the Zyxel device.
DNS Route
Use this screen to view and configure DNS routes on
the Zyxel device.
Policy Route
Use this screen to configure policy routing on the
Zyxel device.
RIP
Use this screen to configure Routing Information
Protocol (RIP, RFC 1058 and RFC 1389) to exchange
routing information with other routers.
To Next Page
Loading...
