ZyXEL Communications EX3301-TO - Page 18

18
VoIP
SIP
SIP Account
Use this screen to set up information about your
SIP account and configure audio settings, such as
volume levels for the phones connected to the
Zyxel device.
SIP Service Provider
Use this screen to view the SIP service provider
information on the Zyxel Device.
Phone
Phone Device
Use this screen to view detailed information on
phones used for Internet phone calls (SIP). You can
define which phone(s) will ring when a specific SIP
address receives an incoming call, and which SIP
address will be used when an outgoing call is made
with a specific phone.
Region
Use this screen to configure settings that depend
on which region of the world the Zyxel Device is
located in. Selecting the region improves the quality
of phone calls.
Call Rule
Use this screen to add, edit, or remove speed-dial
numbers for outgoing calls.
Call History
Use this screen to view the summary of received,
dialled, and missed calls and a call history list. You
can also see detailed information for each outgoing
call you made or each incoming call from someone
calling you.
System Monitor
Log
System Log
Use this screen to view the status of events that
occurred to the Zyxel device.
Security Log
Use this screen to see the security-related logs for
the categories that you select. You can filter the
entries by selecting a severity level and/or category.
Trac Status
WAN
Use this screen to look at the network trac status
and the statistics of the WAN/LAN interfaces and
the NAT.
LAN
This screen allows you to view packet statistics for
each LAN or WLAN interface on the Zyxel device.
NAT
Use this screen to view the list of the devices that
have received an IP address from the Zyxel device’s
LAN or WLAN interface(s) and have ever established
a session with the Zyxel device.
VoIP Status
Use this screen to view VoIP registration status,
current call status, and other related information for
each SIP account.