19
ARP Table
Use the ARP table to view the IPv4-to-MAC address
mappings for each device connected to the Zyxel
device. The neighbour table shows the IPv6-to-MAC
address mappings of each neighbour.
Routing Table
Use this screen to view the routing table of the
Zyxel device
WLAN Station Status
Use this screen to view the status of the wireless
stations that are currently associated to the
Zyxel device.
Cellular
Statistics
Use this screen to look at cellular Internet
connection status.
Maintenance
System
Use this screen to name the Zyxel device (host
name) and give it an associated domain name for
identification purposes.
User Account
Use this screen to create and manage user
accounts and their privileges on the Zyxel device.
For example, you can change the password of the
Web Configurator here.
Remote
Management
MGMT Service
Use this screen to configure the interfaces through
which services can access the Zyxel Device. You can
also specify service port numbers that computers
must use to connect to the Zyxel Device.
Trust Domain
Use this screen to view a list of public IP addresses that
can access the Zyxel device through the services
configured in Maintenance > Remote Management.
SNMP
Use this screen to configure Simple Network
Management Protocol (SNMP) settings on the
Zyxel device.
Time
Use this screen to change the time and date on the
Zyxel device.
Email Notification
Use this screen to view, remove and add e-mail
account information.
Log Settings
Use this screen to configure where the Zyxel device
sends logs to, and which type of logs the Zyxel
device records.
Firmware Upgrade
Use this screen to upload new firmware to the
Zyxel device.
Backup/Restore
Use this screen to back up and restore the Zyxel
device’s configuration settings or reset the factory
default settings.
Reboot
Use this screen to reboot the Zyxel device without
turning the power o.
To Next Page
Loading...
