Gateway 400 User Guide | Your Gateway 400
14
2.2 Indicators and Connectors on the Rear Panel
2.3 Reset Switch
The reset switch is located to the left of the LED indicators (and labeled RES). Use a ballpoint pen or
something similar to press the reset switch.
Be aware that pressing the reset button for different amounts of time initiates different reset ac-
tions as described below:
0.5 s - 5 s Restart with existing configuration
see Restarting the Gateway 400 on page 15
5 s - 15 s Restore factory defaults
see Resetting the Gateway 400 to the Factory Default Settings on page 15
> 15 s Additional reset actions (only if requested by customer support)
Meaning of the LEDs :
Name Color Status Meaning
Master green on Gateway 400 is in the master mode.
Slave yellow on Gateway 400 is in the slave mode.
Note
To avoid damaging the device, press the reset switch lightly, i.e., without applying any
force.
Note
Restarting and Resetting the device will cause all ongoing telephone and Internet con-
nections to be interrupted.
To Next Page
Loading...
