Configuration | Gateway 400 User Guide
45
5.8.10 CWMP
5.8.10.1 ACS Configuration
CWMP (CPE WAN management protocol) is a transport protocol. It is used to transfer configuration
data from an Auto Configuration Server (ACS) to customer premises equipment (CPE) via a broad-
band connection.
The internet address (URL) of the ACS, as well as the associated user name and the password, must
be entered for this purpose. Click Save.
5.8.10.2 Client Configuration
Enter the Common Network Settings and the CNR Settings for your CNR (Connection Request) port.
Under Dynamic CNR Port, specify the whitelisted and blacklisted CNR ports.
5.8.11 SNMP
The SNMP Network Management Protocol allows you to monitor and control the individual net-
work components from a central management station. The network components are referred to as
the Agents, and the management station is referred to as the Manager. To communicate with each
other, the Agents and the Manager must be located in the same Community. The SNMP protocol al-
lows you to remotely configure network components, send error messages to the management sta-
tion, etc.
SNMP is disabled by default. To activate it, you must enable the option Enable SNMP Agent. Under
Community, specify the community in which your Agent and its associated Manager are located.
Click Save.
To Next Page
Loading...
