ZyXEL Communications Gateway 400 - Overview

Gateway 400 User Guide | Configuration
22
Status of the DSL connection
Status of the ETH connection (only if a WANoE connection is used)
Status of the Internet connection
Status of Voice-over-IP (VoIP) connection(s) to the telephony provider
Status of USB connection(s) (USB devices connected to the USB ports)
Status of LAN connection(s) (network connections) over Ethernet
Language setting - Switch between ENglisch or DEutsch (German)
Access protection status - Logout to exit the configuration dialog.
5.2 Overview
This section gives you an overview of the most important settings for the Gateway 400.
 CONNECTION
Status of the DSL or WANoE line.
 INTERNET
Status of the Internet connection.
 NETWORK
Status of the LAN connections.
 USB
Connected USB network devices.
 SECURITY
Enabled security settings.
 TELEPHONY
Configured telephony settings.
 SYSTEM
Hardware and firmware version numbers.
 Security Log
Logging of logins, configuration changes, etc.
The icon
 indicates that a specific setting has not been configured or is disabled.
 indicates that a specific setting has been configured or is enabled.
Click on the corresponding overview item to view additional detailed information.
Click on the “+” symbol to view detailed information on individual overview items or click on the
“-” symbol to hide the details already displayed. Use the arrows next to each overview item to
update the information displayed.