ZyXEL Communications Gateway 400 - Page 31

Configuration | Gateway 400 User Guide
31
5.6.1.1 Settings
The tables below show the preset default network settings:
Default network settings for the LAN 1 socket
Factory settings
Use DHCP Server active
IP Address 192.168.100.1
Subnet Mask 255.255.255.0
Host Name sphairon.box
DHCP Server activated
DHCP Gateway 192.168.100.1
IP Start Address 192.168.100.50
IP End Address 192.168.100.80
Allocation period 2 weeks
Domain Name localdomain
Default network settings for the LAN 2 socket
Factory settings
Use DHCP Server active
IP Address 192.168.200.1
Subnet Mask 255.255.255.0
Host Name sphairon.box
DHCP Server activated
DHCP Gateway 192.168.200.1
IP Start Address 192.168.200.50
IP End Address 192.168.200.80
Allocation period 2 weeks
Domain Name localdomain
Note
With these factory network settings, all computers connected to the Gateway 400 are
part of the same subnet only if they are connected via the LAN 1 or LAN 2 socket. The
built-in DHCP server automatically assigns network addresses. Only one DHCP server
must be active in your network (in this case, Gateway 400). Please ensure that no more
than one DHCP server is enabled and that all other devices are set to obtain their IP ad-
dress automatically.