Frequently Asked Questions | Gateway 400 User Guide
49
Select the option Use the following IP address. Then enter the following:
IP address 192.168.100.100 (if the Gateway 400 has the address 192.168.100.x)
Subnet mask 255.255.255.0
Click OK.
Under Windows XP
Click on Start -> Control Panel (switch to classic view if required) -> Networking Connections.
Double-click on the icon LAN Connection and then click on the Properties button. This opens the
Local Area Connection Properties screen dialog.
Select Internet Protocol (TCP/IP).
Click on the Properties button. This opens the Properties of Internet Protocol (TCP/IPv4) screen
dialog.
Select the option Use the following IP address. Then enter the following:
IP address 192.168.100.100 (if the Gateway 400 has the address 192.168.100.x)
Subnet mask 255.255.255.0
Click OK.
Under Windows Vista
Click on Start -> Control Panel (switch to classic view if required) -> Network and Sharing Center.
In the screen dialog on the left, under Tasks, select the Manage network connections option. In
the new screen dialog, double-click the icon LAN Connection and then click on the Properties
button. This opens the Local Area Connection Properties screen dialog.
Select Internet Protocol Version 4 (TCP/IPv4.
Click on the Properties button. This opens the screen dialog Properties of Internet Protocol Ver-
sion 4 (TCP/IPv4).
Select the option Use the following IP address. Then enter the following:
IP address 192.168.100.100 (if the Gateway 400 has the address 192.168.100.x)
Subnet mask 255.255.255.0
Click OK.
Under Windows 7
Click on Start -> Control Panel (switch to the Large Icons (top right) if required) -> Network and
Sharing Center.
In the screen dialog, select the option Change adapter settings shown on the left. In the new
screen dialog, double-click the icon LAN Connection and then click on the Properties button. This
opens the Local Area Connection Properties screen dialog.
Select Internet Protocol Version 4 (TCP/IPv4.
Click on the Properties button. This opens the screen dialog Properties of Internet Protocol Ver-
sion 4 (TCP/IPv4).
Select the option Use the following IP address. Then enter the following:
IP address 192.168.100.100 (if the Gateway 400 has the address 192.168.100.x)
Subnet mask 255.255.255.0
Click OK.
To Next Page
Loading...
