Chapter 2 Hardware Installation and Connection
GS1100 Series User’s Guide
18
Figure 9 Mounting the Switch on a Rack (GS1100-16 and GS1100-24E)
Figure 10 Mounting the Switch on a Rack (GS1100-24)
2 Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes into
the rack.
Note: Make sure you tighten all the four screws to prevent the Switch from getting slanted.
3 Repeat steps 1 and 2 to attach the second mounting bracket on the other side of the rack.
To Next Page
Loading...
