GS1900 Series User’s Guide
104
C HAPTER 16
Mo nito r: Se c urity
16.1 O ve rvie w
This section provides information for Se c urity in Mo nitor.
This link takes you to a screen where you can view the settings or traffic statistics which contain detailed
information about specific activities.
16.1.1 Wha t Yo u C a n Do in this C ha pte r
•The Po rt Se c urity screen (
Section 16.2 on page 104) displays global and port.
•The 802.1X screen (
Section 16.3 on page 105) displays port and authenticated hosts.
16.2 Po rt Se c urity
Port security allows only packets with dynamically learned MAC addresses and/or configured static
MAC addresses to pass through a port on the Switch. The Switch can learn up to 8K MAC addresses in
total with no limit on individual ports; system total MAC address entry is 8K. Static MAC address still can
be configured when port security is enabled; the function of port security is concerned with dynamic
MAC address learn action. When total MAC address entry is 8k, static MAC can not be configured.
Use this screen to view Switch port security settings. Click Mo nitor > Se c urity > Po rt Se c urity to access this
screen.
To Next Page
Loading...
