GS1900 Series User’s Guide
110
C HAPTER 18
C o nfig ura tio n: Syste m
18.1 O ve rvie w
This section provides information for Syste m in C o nfig ura tio n.
18.1.1 Wha t Yo u C a n Do in this C ha pte r
• The IP screen (Section 18.2 on page 110) displays IPv4 and IPv6 settings.
• The Tim e screen (
Section 18.3 on page 112) displays the system time and SNTP settings.
• The Inform a tio n screen (
Section 18.4 on page 113) displays the system information.
18.2 IP
The Switch needs an IP address for it to be managed over the network. The factory default IP address is
192.168.1.1. The subnet mask specifies the network number portion of an IP address. The factory default
subnet mask is 255.255.255.0.
18.2.1 The IPv4 Sc re e n
Use this screen to view the IPv4 interface status and Switch’s management IPv4 addresses. Click
C o nfig ura tio n > Syste m > IP > IPv4 to open this screen.
Fig ure 109 Configuration > System > IP > IPv4
To Next Page
Loading...
