Chapter 27 Configuration: Spanning Tree
GS1900 Series User’s Guide
176
Fig ure 177 Configuration > Spanning Tree > MST Port
The following table describes the labels in this screen.
27.2.10 The MST Po rt Edit Sc re e n
Use this screen to configure the MST Po rt Ed it settings. Click Config ura tio n > Spa nning Tre e > MST Port >
Edit to open this screen.
Table 124 Configuration > Spanning Tree > MST Port
LABEL DESCRIPTIO N
MST Port
MST ID Select the MST port ID number from the dropdown list.
Port This displays the index number of the MST port.
MSTI ID This displays the index value of the MSTI.
Priority This displays the priority for each port.
Internal Path
Cost
This displays the internal path cost.
Edit Select this check box to configure the properties of a port. Click the Edit button change the
properties of the port.
Cancel Click C a nc e l to discard the changes.
To Next Page
Loading...
