ZyXEL Communications GS2210 Series - Chapter 15 Broadcast Storm Control; Broadcast Storm Control Overview; What You Can Do; Broadcast Storm Control Setup

GS2210 Series User’s Guide
144
CHAPTER 15
Broadcast Storm Control
15.1 Broadcast Storm Control Overview
This chapter introduces and shows you how to configure the broadcast storm control feature.
Broadcast storm control limits the number of broadcast, multicast and destination lookup failure
(DLF) packets the Switch receives per second on the ports. When the maximum number of
allowable broadcast, multicast and/or DLF packets is reached per second, the subsequent packets
are discarded. Enable this feature to reduce broadcast, multicast and/or DLF packets in your
network. You can specify limits for each packet type on each port.
15.1.1 What You Can Do
Use the Broadcast Storm Control screen (Section 15.2 on page 144) to limit the number of
broadcast, multicast and destination lookup failure (DLF) packets the Switch receives per second on
the ports.
15.2 Broadcast Storm Control Setup
Click Advanced Application > Broadcast Storm Control in the navigation panel to display the
screen as shown next.