Chapter 53 Troubleshooting
GS2210 Series User’s Guide
412
Click the Display button in the System Log field in the Management > Diagnostic screen to
check for unauthorized access to your Switch. To avoid unauthorized access, configure the secured
client setting in the Management > Access Control > Remote Management screen for telnet,
HTTP and SSH (see Section 43.6 on page 370). Computers not belonging to the secured client set
cannot get permission to access the Switch.
53.3 Switch Configuration
I lost my configuration settings after I restart the Switch.
Make sure you save your configuration into the Switch’s
nonvolatile memory each time you make changes. Click Save
at the top right corner of the web configurator to save the
configuration permanently. See also Section 42.5 on page 357 for more information about how to
save your configuration.
To Next Page
Loading...
