ZyXEL Communications GS2210 Series - SSH Overview

Chapter 43 Access Control
GS2210 Series User’s Guide
378
43.7.2 SSH Overview
Unlike Telnet or FTP, which transmit data in clear text, SSH (Secure Shell) is a secure
communication protocol that combines authentication and data encryption to provide secure
encrypted communication between two hosts over an unsecured network.
Figure 264 SSH Communication Example
43.7.2.1 How SSH works
The following table summarizes how a secure connection is established between two remote hosts.
Table 193 SNMP Switch Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
stp STPNewRoot 1.3.6.1.2.1.17.0.1 This trap is sent when the STP root switch changes.
zyMrstpNewRoot 1.3.6.1.4.1.890.1.15
.3.52.3.1
This trap is sent when the MRSTP root switch
changes.
zyMstpNewRoot 1.3.6.1.4.1.890.1.15
.3.53.3.1
This trap is sent when the MSTP root switch changes.
STPTopologyChange 1.3.6.1.2.1.17.0.2 This trap is sent when the STP topology changes.
zyMrstpTopologyChange 1.3.6.1.4.1.890.1.15
.3.52.3.2
This trap is sent when the MRSTP topology changes.
zyMstpTopologyChange 1.3.6.1.4.1.890.1.15
.3.53.3.2
This trap is sent when the MSTP root switch changes.
mactable zyMacForwardingTableFull 1.3.6.1.4.1.890.1.15
.3.48.2.1
This trap is sent when more than 99% of the MAC
table is used.
zyMacForwardingTableFullReco
vered
1.3.6.1.4.1.890.1.15
.3.48.2.2
This trap is sent when the MAC address switching
table has become normal from full.
rmon RmonRisingAlarm 1.3.6.1.2.1.16.0.1 This trap is sent when a variable goes over the RMON
"rising" threshold.
RmonFallingAlarm 1.3.6.1.2.1.16.0.2 This trap is sent when the variable falls below the
RMON "falling" threshold.
cfm dot1agCfmFaultAlarm 1.3.111.2.802.1.1.8.
0.1
The trap is sent when the Switch detects a
connectivity fault.
classifier zyAclV2ClassifierLogNotificatio
n
1.3.6.1.4.1.890.1.15
.3.105.4.1
This trap is sent when the Switch detects classifier log
information.