ZyXEL Communications GS2210 Series - LED Mode (Only Available for GS2210-48 HP); Rear Panel

Chapter 3 Hardware Panels
GS2210 Series User’s Guide
30
Figure 16 Opening the Transceiver’s Latch Example
Figure 17 Transceiver Removal Example
3.1.3 LED Mode (only available for GS2210-48HP)
After you push this button (see Section Figure 12 on page 27) to active PoE on the Switch, view the
LEDs to ensure proper functioning of the Switch and as an aid in troubleshooting (see Section 3.3
on page 31).
3.2 Rear Panel
The following figures show the rear panels of the Switch.
Figure 18 Rear Panel: GS2210-8
Figure 19 Rear Panel: GS2210-8HP
Figure 20 Rear Panel: GS2210-24
Figure 21 Rear Panel: GS2210-24HP
Figure 22 Rear Panel: GS2210-48