Chapter 24 Multicast
GS2210 Series User’s Guide
208
24.5.2 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the Switch belong to VLAN
1. In addition, port 7 belongs to the multicast group with VID 200 to receive multicast traffic (the
News and Movie channels) from the remote streaming media server, S. Computers A, B and C in
VLAN 1 are able to receive the traffic.
Figure 146 MVR Configuration Example
To configure the MVR settings on the Switch, create a multicast VLAN in the MVR screen and set
the receiver and source ports.
Delete Select the entry(ies) that you want to remove, then click the Delete button to remove
the selected entry(ies) from the table.
If you delete a multicast VLAN, all multicast groups in this VLAN will also be removed.
Cancel Select Cancel to clear the checkbox(es) in the table.
Table 90 Advanced Application > Multicast > MVR > Group Configuration (continued)
LABEL DESCRIPTION
S
Multicast VID 200
VLAN 1
A
B
C
News: 224.1.4.10 ~ 224.1.4.50
1
Movie: 230.1.2.50 ~230.1.2.60
2
3
7
To Next Page
Loading...
