ZyXEL Communications GS2210 Series - Page 376

Chapter 43 Access Control
GS2210 Series User’s Guide
376
transceiver-ddm zyTransceiverDdmiTemperatur
eOutOfRange
1.3.6.1.4.1.890.1.15.3.84.3.1 This trap is sent when the
transceiver temperature is above or
below the normal operating range.
zyTransceiverDdmiTxPowerOut
OfRange
1.3.6.1.4.1.890.1.15.3.84.3.2 This trap is sent when the
transmitted optical power is above
or below the normal operating
range.
zyTransceiverDdmiRxPowerOut
OfRange
1.3.6.1.4.1.890.1.15.3.84.3.3 This trap is sent when the received
optical power is above or below the
normal operating range.
zyTransceiverDdmiVoltageOut
OfRange
1.3.6.1.4.1.890.1.15.3.84.3.4 This trap is sent when the
transceiver supply voltage is above
or below the normal operating
range.
zyTransceiverDdmiTxBiasOutOf
Range
1.3.6.1.4.1.890.1.15.3.84.3.5 This trap is sent when the
transmitter laser bias current is
above or below the normal
operating range.
zyTransceiverDdmiTemperatur
eOutOfRangeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.6 This trap is sent when the
transceiver temperature is
recovered from the out of normal
operating range.
zyTransceiverDdmiTxPowerOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.7 This trap is sent when the
transmitted optical power is
recovered from the out of normal
operating range.
zyTransceiverDdmiRxPowerOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.8 This trap is sent when the received
optical power is recovered from the
out of normal operating range.
zyTransceiverDdmiVoltageOut
OfRangeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.9 This trap is sent when the
transceiver supply voltage is
recovered from the out of normal
operating range.
zyTransceiverDdmiTxBiasOutOf
RangeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.10 This trap is sent when the
transmitter laser bias current is
recovered from the out of normal
operating range.
Storm-control zyPortStormControlTrap 1.3.6.1.4.1.890.1.15.3.78.2.1 This trap is sent when storm control
is detected on a specific port. A
packet filter action has been applied
on the interface.
zuld zyZuldUnidirectionalDetected 1.3.6.1.4.1.890.1.15.3.110.3.1 This trap is sent when a
unidirectional link is detected.
zyZuldBidirectionalRecovered 1.3.6.1.4.1.890.1.15.3.110.3.2 This trap is sent when the port
which is shut down by ZULD
becomes active again.
Table 190 SNMP Interface Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION