Chapter 6 Tutorials
GS2210 Series User’s Guide
47
2 Go to Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup, and create
a VLAN with ID of 100. Add ports 5, 6 and 7 in the VLAN by selecting Fixed in the Control field as
shown.
Deselect Tx Tagging because you don’t want outgoing traffic to contain this VLAN tag.
Click Add.
Figure 32 Tutorial: Create a VLAN and Add Ports to It
3 Go to Advanced Application > VLAN > VLAN Configuration > VLAN Port Setup, and set the
PVID of the ports 5, 6 and 7 to 100. This tags untagged incoming frames on ports 5, 6 and 7 with
the tag 100.
Figure 33 Tutorial: Tag Untagged Frames
To Next Page
Loading...
