Chapter 8 Control Panel: Network
NAS Series User’s Guide
136
Figure 105 Control Panel > Network > TCP/IP > Network Interface > PPPoE
The following table describes the labels in this screen.
8.4.3 Configure Web Configurator
Click Control Panel > Network > TCP/IP > Web Configurator to configure the port number of HTTP and
HTTPs.
Table 79 Control Panel > Network > TCP/IP > Network Interface > PPPoE
LABEL DESCRIPTION
Enable PPPoE to
directly connect
to the Internet.
Select or clear this field to enable or disable PPPoE.
Username Enter the username exactly as your ISP assigned. If assigned a name in the form user@domain
where domain identifies a service name, then enter both components exactly as given.
Password Enter the password associated with the username above.
Show password Select this field to reveal the password hidden behind asterisks or clear this field to hide the
password.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
To Next Page
Loading...
