ZyXEL Communications NAS542 - Pair Your NAS

Chapter 18 Access Your Cloud Remotely via myZyxelCloud and Zyxel Drive App
NAS Series User’s Guide
305
The following table describes the labels in this screen.
18.1.2 Pair your NAS
After you click Get Started in the myZyxelCloud screen to create an account and sign in, follow the
steps below to pair the NAS and your myZyxelCloud account.
Step 1 Search Devices
Click the Search Devices tab to find your NAS from the search list, and click the Pair NAS with account
button to pair the NAS.
If there are more than one NAS in your network and you don’t know the MAC address of the NAS with
which you want to pair, click the Locate NAS button to locate it. The LED of the NAS for which you click
the Locate NAS button will start to blink for 30 seconds.
If your NAS is not in the list, you can click Manually Add to go to a screen, where you can enter the NAS’s
MAC address and serial number to find and display it in the list.
Table 166 Desktop > myZyxelCloud
LABEL DESCRIPTION
Get Started Click this to go to mycloud.zyxel.com to create a myZyxelcloud account and
configure remote access services.
Account E-mail This field displays the myZyxelcloud account paired with the NAS.
Do you want to unpair your
myZyxelCloud account?
Click unpair to remove the pairing between the NAS and the myZyxelCloud account
if you want to pair the NAS with a different myZyxelCloud account.
You have to pair the NAS and your myZyxelCloud account before performing the
unpair.
Generating thumbnail for
multimedia files, which is
within share folders.
Click Enable to create media files as thumbnails in shared folders. Otherwise, click
Disable.