ZyXEL Communications NAS542 - Log Classes; Log Messages; Log Severity Levels

Chapter 11 Control Panel: Maintenance
NAS Series User’s Guide
189
11.6.1 Log Classes
The following table shows information on log classes.
11.6.2 Log Severity Levels
The following table shows information on log severity levels. Levels range from 0 to 6 with 0 being the
most severe level log and 6 being an informational log only. Log levels are not displayed in the logs and
are for your reference only.
11.6.3 Log Messages
Here are some example log messages.
Table 111 Log Classes
LOG
CATEGORY
DESCRIPTION
Users This log class shows information on user access to the NAS.
Shares This log class shows information on shares being created or deleted.
Services This log class shows information on the operation of the NAS’s built-in services.
System This log class shows all other system related messages.
Network This log class shows information on network configuration, setting changes and so on.
Storage This log class shows information on the NAS’s internal and external storage activities.
Backup This log class shows information on all backup-related activities.
Auto Upload This log class shows information on automatic uploads done by the NAS.
Table 112 Log Severity Levels
LEVEL DESCRIPTION
0Emergency
1Alert
2 Critical
3 Error
4 Warning
5Notice
6Info
Table 113 Log Messages
CLASS SEVERITY MESSAGE
Auto upload INFO %s is queued.
Auto upload INFO %s uploaded (Flickr or YouTube Upload).
Auto upload WARNING error uploading "%s" (%s): %s
Auto upload INFO %s will not be uploaded to %s for there is already a duplicate file.
Auto upload INFO Failed to upload %s to %s (FTP Upload) : %s
Auto upload INFO Successfully upload %s to %s (FTP Upload)
Copy/Sync Button ERROR [USB %s] Backup Folder Does Not Exist.
Copy/Sync Button ERROR [USB %s] Target Folder Does Not Exist.