Chapter 10 Control Panel: Service
NAS Series User’s Guide
164
Figure 129 Control Panel > Service > FTP > Transfer Settings
The following table describes the labels in this screen.
Table 96 Control Panel > Service > FTP > Transfer Settings
LABEL DESCRIPTION
Port range for data
transfer
Select to Use the default port range. Otherwise, select Use the customized port range to
assign a port range for FTP clients to use when downloading files from the NAS using passive
mode. If you select Use the customized port range, enter the first and last port numbers in
the range. Choose from 1024 to 65535.
The connection limit is restricted to half of the port numbers within the range if this value is
smaller than the one configured in the Connection Limit field of the FTP > General Settings
screen. For example, you specified a port range from 1024 to 1029 and configured 10 in the
Connection Limit field. The FTP connection limit will only be 3 (6 ports in the range divided by
2) because it is the smaller value.
Enable FTP transfer
rate limitation for all
users (including
admin)
Select this if you want to limit the download/upload bandwidth for all users who are logged
into the NAS, including the administrator.
• Max. Upload Rate - Enter the upload speed (in kilobytes/s) that the NAS allows for users
who are logged into the NAS.
• Max. Download Rate - Enter the download speed (in kilobytes/s) that the NAS allows for
users who are logged into the NAS.
Enable FTP transfer
rate limitation for
Anonymous FTP users
This option is configurable only when you select Enable Anonymous FTP Access in the FTP >
General Settings screen.
Select this if you want to limit the download/upload bandwidth for users who log into the
NAS using ‘FTP’ or ‘anonymous’ as a username and no password.
• Max. Upload Rate - Enter the upload speed (in kilobytes/s) that the NAS allows for users
who are logged into the NAS.
• Max. Download Rate - Enter the download speed (in kilobytes/s) that the NAS allows for
users who are logged into the NAS.
Apply Click this to save your changes.
Reset Click this to restore your previously saved settings.
To Next Page
Loading...
