Chapter 7 Broadband
NR/FWA Indoor Series User’s Guide
114
Figure 61 Network Setting > Broadband > Cellular PLMN
The following table describes the labels in this screen.
After selecting to disable the following warning appears. Click OK to continue.
Figure 62 Network Setting > Broadband > Cellular PLMN > Manual Scan Warning
Click Scan to check for available PLMNs in the area surrounding the Zyxel Device, and then display
them in the network list. Select from the network list and click Apply.
Table 28 Network Setting > Broadband > Cellular PLMN
LABEL DESCRIPTION
PLMN Management
PLMN Auto Selection Click this switch to enable and have the Zyxel Device automatically connect to the first
available mobile network.
Select disabled to display the network list and manually select a preferred network.
Apply Click Apply to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
