ZyXEL Communications NR Series - Making a Voip Call

Chapter 5 Web Interface Tutorials
NR/FWA Indoor Series User’s Guide
79
2 Click the Modify icon of PHONE1 to configure PHONE1 on your Zyxel Device. The following screen
appears.
3 Under SIP1 SIP Account to Make Outgoing Call, select SIP1 to have the phone connected to the first
phone port use the registered SIP1 account to make outgoing calls.
4 Under SIP Account(s) to Receive Incoming Call, select SIP1 to have the phone connected to the first
phone port receive phone calls for the SIP1 account. Click OK to save your changes.
5.7.5 Making a VoIP Call
Follow these steps to make a phone call using Voice over IP (VoIP).
1 Make sure you connect a telephone to phone port 1 on the Zyxel Device.
2 Make sure the Zyxel Device is turned on and connected to the Internet.