Chapter 9 Home Networking
NR/FWA Indoor Series User’s Guide
151
See Section 9.6 on page 161 for examples on installing and using UPnP.
9.2 LAN Setup
A LAN IP address is the IP address of a networking device in the LAN. You can use the Zyxel Device's LAN
IP address to access its Web Configurator from the LAN. The DHCP server settings define the rules on
assigning IP addresses to LAN clients on your network.
Use this screen to set the Local Area Network IP address and subnet mask of your Zyxel Device.
Configure DHCP settings to have the Zyxel Device or a DHCP server assign IP addresses to devices. Click
Network Setting > Home Networking to open the LAN Setup screen.
Follow these steps to configure your LAN settings.
1 Enter an IP address into the IP Address field. The IP address must be in dotted decimal notation. This will
become the IP address of your Zyxel Device.
2 Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed otherwise it is best to leave this
alone, the configurator will automatically compute a subnet mask based upon the IP address you
entered.
3 Click Apply to save your settings.
To Next Page
Loading...
