Chapter 8 Wireless
NR/FWA Indoor Series User’s Guide
136
Note: If the current channel is a DFS channel, the warning ‘Channel scan process is denied
because current channel is a DFS channel (Channel: 52 – 140). If you want to run
channel scan, please select a non-DFS channel and try again.’ appears.
Note: The AP count may not be a real-time value.
Figure 79 Network Setting > Wireless > Channel Status
The following table describes the labels in this screen.
Table 44 Network Setting > Wireless > Channel Status
LABEL DESCRIPTION
Channel Monitor
Wireless Network Setup
Scan wireless
LAN Channels
Click the Scan button to scan WiFi channels.
Channel Scan
Result
This displays the results of the channel scan.
The blue bar displays the number of access points (AP count) in the WiFi channel.
The orange bar displays the WiFi channel that the Zyxel Device is now using.
To Next Page
Loading...
