Chapter 7 Broadband
NR/FWA Indoor Series User’s Guide
107
Figure 55 Network Setting > Broadband > Cellular WAN
The following table describes the fields in this screen.
7.6 Cellular APN
Click Network Setting > Broadband > Cellular APN to display the following screen. Use this screen to
manage the APNs that Zyxel Device is connected to.
Note: This feature is only available on certain models. For details, see the features comparison
table at Section 1.1 on page 17.
Table 23 Network Setting > Broadband > Cellular WAN
LABEL DESCRIPTION
Antenna
Antenna Select Select between External or Internal Antenna for your Zyxel Device.
Data Roaming Click this to enable data roaming on the Zyxel Device.
With cellular roaming, a SIM card works in areas which are not covered by the SIM’s service
provider. Enable roaming to keep the Zyxel Device connected to the Internet when you are
traveling outside the geographical coverage area of the network to which you are registered,
such as a different country.
Note: Roaming charges may apply when Data Roaming is enabled.
Apply Click this to save your changes.
Cancel Click this to exit this screen without saving.
To Next Page
Loading...
