Chapter 6 Connection Status
NR/FWA Indoor Series User’s Guide
93
6.1.5 WiFi Settings
Use this screen to enable or disable the main WiFi network. When the switch turns blue, the function is
enabled. You can use this screen or the QR code on the upper right corner to check the SSIDs (WiFi
network name) and passwords of the main WiFi networks. If you want to show or hide your WiFi
passwords, click the Eye icon ( ).
Figure 43 WiFi Settings
Click the Arrow icon ( ) to configure the SSIDs and/or passwords for your main WiFi networks. Click the
Eye icon ( ) to display the characters as you enter the WiFi Password.
Scanning the QR code is an alternative way to connect your WiFi client to the WiFi network.
MCS MCS stands for modulation coding scheme. The base station selects MCS based on current
radio conditions. The higher the MCS the more bits can be transmitted per time unit.
RI This displays the Rank Indication, one of the control information that a UE will report to eNodeB
(Evolved Node-B) on either PUCCH (Physical Uplink Control Channel) or PUSCH (Physical Uplink
Shared Channel) based on uplink scheduling.
PMI This displays the Precoding Matrix Indicator (PMI).
PMI is for transmission modes 4 (closed loop spatial multiplexing), 5 (multi-user MIMO), and 6
(closed loop spatial multiplexing using a single layer).
PMI determines how cellular data are encoded for the antennas to improve downlink rate.
SCC Information If the cellular service provider supports carrier aggregation (CA), then this section displays
statistics for the connection’s secondary component carriers (SCCs).
# This displays the ID of the SCC. Some cellular providers support two or more SCCs.
Physical Cell ID This displays the Physical Cell ID (PCI) of the SCC.
RFCN This displays the Radio Frequency Channel Number of DL carrier frequency used by the SCC.
Band This displays the current cellular band used by the SCC.
RSSI This displays the cellular signal strength between an associated cellular station and the Zyxel
Device for this SCC.
RSRP This displays the Received Signal Code Power of the SCC.
RSRQ This displays the Reference Signal Receive Quality of the SCC.
SINR This displays the Signal to Interference plus Noise Ratio (SINR) of the SCC.
Table 15 Cellular Info: Detailed Information (continued)
LABEL DESCRIPTION
To Next Page
Loading...
