NR/FWA Indoor Series User’s Guide
288
CHAPTER 27
System
27.1 System Overview
Use this screen to name your Zyxel Device (Host) and give it an associated domain name for
identification purposes.
27.2 System
Click Maintenance > System to open the following screen. Assign a unique name to the Zyxel Device so
it can be easily recognized on your network. You can use up to 30 alphanumeric characters except [ ?
], [ | ], [ ' ], [ " ] or [ , ].
Figure 175 Maintenance > System
The following table describes the labels in this screen.
Table 120 Maintenance > System
LABEL DESCRIPTION
Host Name Enter a host name for your Zyxel Device. Enter a descriptive name of up to 30 alphanumeric
characters except [ " ], [ ` ], [ ' ], [ < ], [ > ], [ ^ ], [ $ ], [ | ], [ & ], or [ ; ].
For some models, the supported maximum input length is 16 alphanumeric characters.
Domain Name Enter a domain name for your host Zyxel Device. Up to 30 printable ASCII characters are allowed
except [ " ], [ ` ], [ ' ], [ < ], [ > ], [ ^ ], [ $ ], [ | ], [ & ], or [ ; ].
Cancel Click Cancel to abandon this screen without saving.
Apply Click Apply to save your changes.
To Next Page
Loading...
