Chapter 18 Certificates
NR/FWA Indoor Series User’s Guide
235
18.5 Import Trusted CA Certificate
Click Import Certificate in the Trusted CA screen to open the Import Certificate screen. The Zyxel Device
trusts any valid certificate signed by any of the imported trusted CA certificates. Certificates should be in
one of the following formats: Binary X.509, PEM (base-64) encoded, Binary PKCS#7, or PEM (base-64)
encoded PKCS#7.
Note: You must remove any spaces from the certificate’s filename before you can import the
certificate.
Figure 147 Security > Certificates > Trusted CA > Import Certificate
The following table describes the labels in this screen.
Type This field displays general information about the certificate. ca means that a Certification
Authority signed the certificate.
Modify Click the View icon to open a screen with an in-depth list of information about the certificate
(or certification request).
Click the Remove icon to delete the certificate (or certification request). You cannot delete a
certificate that one or more features is configured to use.
Table 91 Security > Certificates > Trusted CA (continued)
LABEL DESCRIPTION
Table 92 Security > Certificates > Trusted CA > Import Certificate
LABEL DESCRIPTION
Certificate File
Path
Enter the location of the file you want to upload in this field or click Choose File/Browse to find it.
Choose File/
Browse
Click this to find the certificate file you want to upload.
OK Click this to save the certificate on the Zyxel Device.
Cancel Click this to exit this screen without saving.
To Next Page
Loading...
