Chapter 4 Quick Start
NR/FWA Indoor Series User’s Guide
46
Figure 32 Wizard – Time Zone
4.4 Quick Start Setup – WiFi
Turn WiFi on or off. If you keep it on, record the WiFi Name and Password in this screen so you can
configure your WiFi clients to connect to the Zyxel Device. If you want to show or hide your WiFi
password, click the Eye icon ( ).
Figure 33 Wizard – Wireless
Note: You can also enable the wireless service using any of the following methods:
Click Network Setting > Wireless to open the General screen. Then select Enable in the
WiFi field. Or, press the WiFi button for one second.
4.5 Quick Start Setup – Finish
Your Zyxel Device saves your settings and attempts to connect to the Internet.
To Next Page
Loading...
