EasyManua.ls Logo

ZyXEL Communications NR5103 - Page 275

ZyXEL Communications NR5103
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 22 VoIP Status
NR/FWA Indoor Series User’s Guide
275
From Phone Port
Type
This field displays the phone ports type used to originate, start, or create the current VoIP call.
Type Two possible type values will be displayed here: SIP – For the current call which is
categorized as Incoming Call in the Call Type filed, this field will show the type SIP. FXS – As for
the other cases: Outgoing Call and Internal Call, this field will show the corresponding local
phone port type: FXS, the legacy analog phone port on the device.
To Phone Port Type This field displays the phone ports type used to receive the current VoIP call. Three possible
type Type values will be displayed here: SIP – For the current call which is categorized as
Outgoing Call in the Call Type field, this field will show the type SIP. FXS and Unknown – As for
the other cases: Incoming Call and Internal Call, this field will show the corresponding local
phone port type: FXS, the legacy analog phone port on the device. While the call is
established, this field shows Unknown during the call setup phase (signaling phase). This is
because one or more local phone ports can be configured or designed to receive these two
types of calls, see the Call Type above, and the local phone port will answer the call that
hasn't been determined yet at that time.
Peer Number This field displays the SIP number of the party that is currently engaged in a VoIP call through a
phone port.
Phone Status
Phone This field displays the name of a phone port on the Device.
Outgoing Number This field displays the SIP number that you use to make calls on this phone port.
Incoming Number This field displays the SIP number that you use to receive calls on this phone port.
Hook Status This field displays whether the phone is in the on or off hook status.
Off-Hook means a telephone connected to one of the phone port has its receiver off the
hook.
On-Hook means a telephone connected to one of the phone port has its receiver on the
hook.
Table 115 System Monitor > VoIP Status (continued)
LABEL DESCRIPTION

Table of Contents

Related product manuals