ZyXEL Communications NR5103 - Page 291

Chapter 28 User Account
NR/FWA Indoor Series User’s Guide
291
Idle Timeout Enter the length of inactive time before the Zyxel Device will automatically log the user out of the
Web Configurator.
Lock Period Enter the length of time a user must wait before attempting to log in again after a number of
consecutive wrong passwords have been entered as defined in Retry Times.
Group
Specify whether this user will have Administrator or User privileges. An Administrator account can
access all Web Configurator menus. A User account can only access Monitor and Maintenance
menus.
The maximum account number of Administrator and User are both four. The total number of the
users allowed to log in the Zyxel Device at the same time is eight.
The Administrator privileges are the following:
• Quick Start setup.
• The following screens are visible for setup:
Broadband, Wireless, Home Networking, Routing, NAT, DNS, Firewall, MAC Filter, Voice, Log,
Traffic Status, ARP Table, Routing Table, Cellular WAN Status, System, User Account, Remote
Management, TR-069 Client, Time, Email Notification, Log Setting, Firmware Upgrade,
Backup/Restore, Reboot, Diagnostic.
The User privileges are the following:
• The following screens are visible for setup:
Log, Traffic Status, ARP Table, Routing Table, Cellular WAN Status, User Account, Remote
Management, Time, Email Notification, Log Setting,
Firmware Upgrade, Backup/Restore,
Reboot, Diagnostic.
Cancel Click Cancel to restore your previously saved settings.
OK Click OK to save your changes.
Table 122 Maintenance > User Account > User Account Add/Edit (continued)
LABEL DESCRIPTION