Chapter 30 TR-069 Client
NR/FWA Indoor Series User’s Guide
300
WAN Interface
Used by TR-069
Client
Select a WAN interface through which the TR-069 traffic passes.
If you select Any_WAN, the Zyxel Device automatically passes the TR-069 traffic when any WAN
connection is up.
If you select Multi_WAN, you also need to select two or more pre-configured WAN interfaces. The
Zyxel Device automatically passes the TR-069 traffic when one of the selected WAN connections
is up.
Cellular WAN The Zyxel Device automatically passes the TR-069 traffic when cellular WAN connection is up
.
Display SOAP
Messages on
Serial Console
Click to enable (switch turns blue) the dumping of all SOAP messages during the ACS server
communication with the CPE
.
Connection
Request
Authentication
Select this option to enable authentication when there is a connection request from
the ACS.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the Zyxel Device, this user name is used to
authenticate the ACS.
Connection
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the Zyxel Device, this password is used to
authenticate the ACS.
Connection
Request URL
This shows the connection request URL.
The ACS can use this URL to make a connection request to the Zyxel Device.
Supplementary
ACS URL
Enter the URL or IP address of an additional TR-069 auto-configuration server.
Supplementary
ACS User Name
Enter the user name of an additional TR-069 auto-configuration server for authentication.
Supplementary
ACS Password
Enter the password of an additional TR-069 auto-configuration server for authentication.
Validate ACS
Certificate
Click to enable (switch turns blue) the validation of a local certificate used by TR-069 client.
Local
Certificate Used
by TR-069 Client
You can choose a local certificate used by TR-069 client. The local certificate should be
imported in the Security > Certificates > Local Certificates screen.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore the screen’s last saved settings.
Table 129 Maintenance > TR-069 Client (continued)
LABEL DESCRIPTION
To Next Page
Loading...
