Chapter 3 Web Configurator
NR/FWA Indoor Series User’s Guide
40
Figure 28 Navigation Panel
Table 12 Navigation Panel Summary
LINK TAB FUNCTION
Home Use this screen to configure basic Internet access and wireless settings.
This screen also shows the network status of the Zyxel Device and
computers/devices connected to it.
Network Setting
Broadband Broadband Use this screen to view and configure ISP parameters, WAN IP address
assignment, and other advanced properties. You can also add new
WAN connections.
WAN Backup Use this screen to configure your Zyxel Device’s Internet settings if the
cellular connection is down.
Ethernet WAN Use this screen to convert the LAN port as WAN port, or restore the WAN
port to LAN port.
Cellular WAN Use this screen to configure a cellular WAN connection.
Cellular APN Use this screen to configure the Access Point Name (APN) provided by
your service provider.
Cellular SIM Use this screen to enter a PIN for your SIM card to prevent others from
using it.
Cellular Band Use this screen to configure the cellular frequency bands that can be
used for Internet access as provided by your service provider.
Cellular PLMN Use this screen to view available PLMNs and select your preferred
network.
Cellular IP
Passthrough
Use this screen to enable IP Passthrough on the Zyxel Device.
Cellular Lock Use this screen to enable or disable PCI Lock.
Cellular SMS Use this screen to enable SMS Inbox and receive SMS messages.
Wireless General Use this screen to configure the WiFi settings and WiFi authentication or
security settings.
Guest/More AP Use this screen to configure multiple BSSs on the Zyxel Device.
MAC
Authentication
Use this screen to block or allow wireless traffic from wireless devices of
certain SSIDs and MAC addresses to the Zyxel Device.
To Next Page
Loading...
