ZyXEL Communications P-660 series

To Next Page

To Previous Page

P-660 Series Support Notes

Rem IP Addr = 0.0.0.0

Rem Subnet Mask= 0.0.0.0

My WAN Addr= N/A

NAT= Full Feature

Address Mapping Set= 1

Metric= 2

Private= No

RIP Direction= None

Version= RIP-1

Multicast= None

IP Policies=

Enter here to CONFIRM or ESC to CANCEL:

Step 1. Enter 11 from the Main Menu.

Step 2. Move the cursor to the Edit IP field, press the [SPACEBAR] to toggle the

default No to Yes, then press [ENTER] to bring up Menu 11.3-Remote Node

Network Layer Options.

The following table describes the options for Network Address Translation.

Field Options Description

Full Feature

When you select this option the SMT will use

Address Mapping Set 1 (Menu 15.1-see later for

further discussion).

None

NAT is disabled when you select this option.

Network Address

Translation

SUA Only

When you select this option the SMT will use

Address Mapping Set 255 (Menu 15.1-see later for

further discussion). This option use basically

Many-to-One Overload mapping. Select Full

Feature when you require other mapping types. It

is a convenient, pre-configured, read only,

Many-to-One mapping set, sufficient for most

purposes and helpful to people already familiar

with SUA in previous ZyNOS versions. Note that

there is also a Server type whose IGA is 0.0.0.0 in

this set.

Table: Applying NAT in Menu 4 and Menu 11.3

ZyXEL Communications P-660 series - Page 36