ZyXEL Communications UAG Series - VPN Configuration Provisioning Commands

Chapter 19 IPSec VPN
UAG CLI Reference Guide
134
19.2.5 VPN Configuration Provisioning Commands
This table lists the commands for VPN configuration provisioning.
[no] crypto map_name Adds the specified IPSec SA to the specified VPN concentrator. The no
command removes the specified IPSec SA from the specified VPN
concentrator.
vpn-concentrator rename profile_name
profile_name
Renames the specified VPN concentrator (first profile_name) to the
specified name (second profile_name).
Table 71 vpn-concentrator Commands: VPN Concentrator (continued)
COMMAND DESCRIPTION
Table 72 vpn-configuration-provision Commands: VPN Configuration Provisioning
COMMAND DESCRIPTION
vpn-configuration-provision rule {
append | conf_index | insert conf_index
}
Enters the VPN configuration provisioning sub-command mode to add or
edit a rule.
conf_index: The index number of a VPN configuration provisioning rule,
1 to the UAG’s maximum number of VPN connection rules.
[no] activate Turns the VPN configuration provisioning rule on or off.
crypto map_name Specifies the name of the IPSec VPN connection (map_name) to bind to this
VPN configuration provisioning rule’s user or group.
user username Specifies a user or group of users allowed to use the UAG IPSec VPN client
to retrieve the associated VPN rule settings. A user may belong to a
number of groups. If VPN configuration provisioning rules are configured
for different groups, the UAG will allow VPN rule setting retrieval based on
the first match found. Admin or limited-admin users are not allowed.
no user Removes the VPN configuration provisioning rule’s user or user group
configuration. In other words, any users can match the rule. In the GUI
“any” will display in the Allowed User field.
exit Leaves the sub-command mode.
vpn-configuration-provision rule {
delete conf_index | move conf_index to
conf_index }
Deletes or moves the specified VPN configuration provisioning rule.
[no] vpn-configuration-provision
activate
Turns the VPN configuration provisioning service on or off.
vpn-configuration-provision
authentication auth_method
Sets the authentication method the VPN configuration provisioning service
uses to authenticate users.
show vpn-configuration-provision
activation
Displays whether or not the VPN configuration provisioning service is
activated.
show vpn-configuration-provision
authentication
Displays the authentication method the VPN configuration provisioning
service uses to authenticate users.
show vpn-configuration-provision rules Displays the settings of the configured VPN configuration provisioning
rules.