Chapter 32 System
UAG CLI Reference Guide
206
32.6.3 DNS Command Example
This command sets an A record that specifies the mapping of a fully qualified domain name
(www.abc.com) to an IP address (210.17.2.13).
[no] ip dns server zone-forwarder
{<1..32>|append|insert <1..32>}
{domain_zone_name|*} interface interface_name
Sets a domain zone forwarder record that specifies a fully qualified
domain name. You can also use a star (*) if all domain zones are
served by the specified DNS server(s).
domain_zone_name: This is a domain zone, not a host. For
example, zyxel.com.tw is the domain zone for the
www.zyxel.com.tw fully qualified domain name. For example,
whenever the UAG receives needs to resolve a zyxel.com.tw
domain name, it can send a query to the recorded name server IP
address.
interface_name: This is the interface through which the ISP
provides a DNS server. The interface should be activated and set
to be a DHCP client.
The
no command deletes a zone forwarder record.
ip dns server zone-forwarder
{<1..32>|append|insert <1..32>}
{domain_zone_name|*} user-defined w.x.y.z
[private | interface {interface_name | auto}]
Sets a domain zone forwarder record that specifies a DNS server’s
IP address.
private | interface: Use private if the UAG connects to the
DNS server through a VPN tunnel. Otherwise, use the interface
command to set the interface through which the UAG sends DNS
queries to a DNS server. The auto means any interface that the
UAG uses to send DNS queries to a DNS server according to the
routing rule.
ip dns server zone-forwarder move <1..32> to
<1..32>
Changes the index number of a zone forwarder record.
no ip dns server rule <1..32> Deletes a service control rule.
show ip dns server Displays all DNS entries.
show ip dns server database Displays all configured records.
show ip dns server status Displays whether this service is enabled or not.
Table 117 Command Summary: DNS (continued)
COMMAND DESCRIPTION
Router# configure terminal
Router(config)# ip dns server a-record www.abc.com 210.17.2.13