ZyXEL Communications UAG Series - Page 163

Chapter 22 User/Group
UAG CLI Reference Guide
163
22.2.5.1 Additional User Command Examples
The following commands display the users that are currently logged in to the UAG and forces the
logout of all logins from a specific IP address.
Router# configure terminal
Router(config)# show users all
No: 0
Name: admin
Type: admin
From: console
Service: console
Session_Time: 25:46:00
Idle_Time: unlimited
Lease_Timeout: unlimited
Re_Auth_Type: re-auth-time
Re_Auth_Timeout: unlimited
Due_time: N/A
User_Info: admin
No: 1
Name: admin
Type: admin
From: 192.168.1.34
Service: http/https
Session_Time: 00:02:26
Idle_Time: unlimited
Lease_Timeout: unlimited
Re_Auth_Type: re-auth-time
Re_Auth_Timeout: unlimited
Due_time: N/A
User_Info: admin
Router(config)# users force-logout 192.168.1.34
Logout user 'admin'(from 192.168.1.34 ): OK
Total 1 user has been forced logout
Router(config)# show users all
No: 0
Name: admin
Type: admin
From: console
Service: console
Session_Time: 25:48:33
Idle_Time: unlimited
Lease_Timeout: unlimited
Re_Auth_Type: re-auth-time
Re_Auth_Timeout: unlimited
Due_time: N/A
User_Info: admin