Chapter 9 Routing
VMG8825-B Series User’s Guide
145
Figure 69 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
9.3.1 The DNS Route Add Screen
You can manually add the VMG’s DNS route entry. Click Add New DNS Route in the Network Setting >
Routing > DNS Route screen. The screen shown next appears.
Figure 70 DNS Route Add
The following table describes the labels on this screen.
Table 41 Network Setting > Routing > DNS Route
LABEL DESCRIPTION
Add New DNS
Route
Click this to add a new DNS route.
# This is the index number of a DNS route.
Status This field displays whether the DNS route is active or not. A yellow bulb signifies that this DNS route
is active. A gray bulb signifies that this DNS route is not active.
Domain Name This is the host name or domain name of the DNS route entry.
WAN Interface This is the WAN connection through which the VMG forwards DNS requests for this domain name.
Subnet Mask This is the subnet mask of the DNS route entry.
Modify Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.
Table 42 DNS Route Add
LABEL DESCRIPTION
Active Select Enable or Disable to activate or deactivate the DNS route.
Domain Name Enter the domain name of the DNS route entry.
To Next Page
Loading...
