Chapter 18 Firewall
VMG8825-B Series User’s Guide
208
The following table describes the labels in this screen.
18.3.1 Add/Edit a Service
Use this screen to add a customized service rule that you can use in the firewall’s ACL rule configuration.
Click Add new service entry or the edit icon next to an existing service rule in the Service screen to
display the following screen.
Figure 119 Service: Add/Edit
The following table describes the labels in this screen.
Table 83 Security > Firewall > Protocol
LABEL DESCRIPTION
Add new
Protocol entry
Click this to add a new service.
Name This is the name of your customized service.
Description This is the description of your customized service.
Ports/Protocol
Number
This shows the IP protocol (TCP, UDP, ICMP, or TCP/UDP) and the port number or range of ports
that defines your customized service. Other and the protocol number displays if the service uses
another IP protocol.
Modify Click the Edit icon to edit the entry.
Click the Delete icon to remove this entry.
Table 84 Security > Firewall > Protocol: Add/Edit
LABEL DESCRIPTION
Service Name Enter a unique name (up to 32 printable English keyboard characters, including spaces) for your
customized port.
Description Enter a description for your customized port.
Protocol Choose the IP protocol (TCP, UDP, ICMP, or Other) that defines your customized port from the
drop-down list box. Select Other to be able to enter a protocol number.
Protocol
Number
This field is displayed if you select Other as the protocol.
Enter the protocol number of your customized port.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
