VMG8825-B Series User’s Guide
276
CHAPTER 31
WLAN Station Status
31.1 Overview
Click the System Monitor > WLAN Station Status to open the following screen. View the wireless stations
that are currently associated to the VMG. Being associated means that a wireless client (for example,
your network or computer with a wireless network card) has connected successfully to the AP (or
wireless router) using the same SSID, channel and security settings.
Figure 164 System Monitor > WLAN Station Status
The following table describes the labels in this screen.
Table 130 System Monitor > WLAN Station Status
LABEL DESCRIPTION
# This is the index number of an associated wireless station.
MAC Address This field displays the MAC address of an associated wireless station.
Rate (Mbps) This field displays the transmission rate of the wireless LAN traffic between an associated
wireless station and an AP.
RSSI (dBm) This field displays the strength of the wireless LAN signal between an associated wireless
station and an AP.
The normal range is -30 dBm to -79 dBm. If the value drops below -80 dBm, try moving the
associated wireless station closer to the VMG to get better signal strength.
To Next Page
Loading...
