VMG8825-B Series User’s Guide
292
CHAPTER 39
Log Setting
39.1 Overview
You can configure where the VMG sends logs and which logs and/or immediate alerts the VMG records
in the Logs Setting screen.
39.2 The Log Settings Screen
To change your VMG’s log settings, click Maintenance > Logs Setting. The screen appears as shown.
Figure 177 Maintenance > Logs Setting
The following table describes the fields on this screen.
Table 142 Maintenance > Logs Setting
LABEL DESCRIPTION
Syslog Setting
Syslog Logging The VMG sends a log to an external syslog server. Select Enable to enable syslog logging.
To Next Page
Loading...
