Chapter 25 Traffic Status
VMG8825-B Series User’s Guide
262
The following table describes the fields in this screen.
25.4 The NAT Status Screen
Click System Monitor > Traffic Status > NAT to open the following screen. The figure in this screen shows
the NAT session statistics for hosts currently connected on the VMG.
Figure 157 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Table 122 System Monitor > Traffic Status > LAN
LABEL DESCRIPTION
Refresh Interval Select how often you want the VMG to update this screen.
Interface This shows the LAN or WLAN interface.
Bytes Sent This indicates the number of bytes transmitted on this interface.
Bytes Received This indicates the number of bytes received on this interface.
Interface This shows the LAN or WLAN interfaces.
Sent (Packets)
Data This indicates the number of transmitted packets on this interface.
Error This indicates the number of frames with errors transmitted on this interface.
Drop This indicates the number of outgoing packets dropped on this interface.
Received (Packets)
Data This indicates the number of received packets on this interface.
Error This indicates the number of frames with errors received on this interface.
Drop This indicates the number of received packets dropped on this interface.
Table 123 System Monitor > Traffic Status > NAT
LABEL DESCRIPTION
Refresh Interval Select how often you want the VMG to update this screen.
Device Name This displays the name of the connected host.
IPv4 Address This displays the IP address of the connected host.
MAC Address This displays the MAC address of the connected host.
To Next Page
Loading...
