Chapter 23 Voice
VMG8825-B Series User’s Guide
241
Each field is described in the following table.
23.6 The Region Screen
Use this screen to maintain settings that depend on which region of the world the VMG is in. To access
this screen, click VoIP > Region.
Figure 144 VoIP > Region
Each field is described in the following table.
Table 107 VoIP > Phone > Phone Device > Edit
LABEL DESCRIPTION
SIP Account to
Make Outgoing
Call
Select the SIP account you want to use when making outgoing calls with the analog phone
connected to this phone port.
SIP Account(s) to
Receive Incoming
Call
Select a SIP account if you want to receive phone calls for the selected SIP account on this
phone port.
If you select more than one SIP account for incoming calls, there is no way to distinguish
between them when you receive phone calls. If you do not select a source for incoming calls,
you cannot receive any calls on this phone port.
Immediate Dial
Enable
Select this if you want to use the pound key (#) to tell the VMG to make the phone call
immediately, instead of waiting the number of seconds you selected in the Dialing Interval
Selection field of the VoIP > SIP > SIP Service Provider > Add New Provider/Edit screen.
If you select this, dial the phone number, and then press the pound key. The VMG makes the
call immediately, instead of waiting. You can still wait, if you want.
OK
Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 108 VoIP > Region
LABEL DESCRIPTION
Region Settings Select the place in which the VMG is located.
Call Service Mode Select the mode for supplementary phone services (call hold, call waiting, call transfer and
three-way conference calls) that your VoIP service provider supports.
Europe Type - use supplementary phone services in European mode
USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact your VoIP service
provider.
To Next Page
Loading...
