Chapter 34 User Account
VMG8825-B Series User’s Guide
282
34.2.1 The User Account Add/Edit Screen
Click Add New Account or the Edit icon of an existing account in the Maintenance > User Account to
open the following screen.
Figure 168 Maintenance > User Account > Add/Edit
The following table describes the labels on this screen.
Table 134 Maintenance > User Account > Add/Edit
LABEL DESCRIPTION
Active This field indicates whether the user account is active or not.
Clear the check box to disable the user account. Select the check box to enable it.
User Name Enter a new name for the account. This field displays the name of an existing account.
Password Type your new system password (up to 256 characters). Note that as you type a password, the
screen displays a (*) for each character you type. After you change the password, use the new
password to access the VMG.
Verify Password Type the new password again for confirmation.
Retry Times Enter the number of times consecutive wrong passwords can be entered for this account. 0
means there is no limit.
Idle Timeout Enter the length of inactive time before the VMG will automatically log the user out of the web
configurator.
Lock Period Enter the length of time a user must wait before attempting to log in again after a number if
consecutive wrong passwords have been entered as defined in Retry Times.
Group Specify whether this user will have Administrator or User privleges.
OK Click OK to save your changes.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...
