Chapter 6 Broadband
VMG8825-B Series User’s Guide
77
Figure 28 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode)
The following table describes the labels on this screen.
Table 10 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode)
LABEL DESCRIPTION
General
Active Select Enable or Disable to activate or deactivate the interface.
Name Specify a descriptive name for this connection.
Type Select whether it is an ADSL/VDSL over PTM or ADSL over ATM connection.
To Next Page
Loading...
