ZyXEL Communications XS1920 Series - Configuring Static Routing

Chapter 35 Static Route
XS1920 Series User’s Guide
292
Figure 203 Example of Static Routing Topology
Click IP Application > Static Routing in the navigation panel to display the screen as shown.
Click the link next to IPv4 Static Route to open a screen where you can create IPv4 static routing
rules. Click the link next to IPv6 Static Route to open a screen where you can create IPv6 static
routing rules.
Figure 204 IP Application > Static Routing
35.3 Configuring Static Routing
Click IP Application > Static Routing > IPv4 Static Route in the navigation panel to display the
screen as shown.
R1
R2
A
R3
Internet